Screw conveyor for vertical transport
- A stainless steel trough, thickness 3mm.
- In the trough is a wear-resistant layer of high strength. Thickness of the coating: 10mm.
- A screw in spiral form, thickness 20mm. The diameter is adapted to the trough.
- The screw rests over all its length on the coating.
- This coating is replaceable, in parts of 1,2,or 3m.
- The end of the screw is coupled by a support, bolted to the gearbox.
- The drive is a hollow shaft geared motor.
- The reducer is fixed to the trough by a support.
- The reducer is removable without disassembling the screw.
- The trough is covered by a bolted cover plate.
- The screw is equipped with inlet and outlet hoppers, and is entirely closed.
- The screw is made of special hard steel to resist to the maximum wear of friction.
- The supports are adapted to the local circumstances, and are included in the price, according to description in the offer.
| Models | |||
| Type |
Trough width [mm] |
Screw diameter [mm] |
Approximate flow (volume) [m³/h] |
| U200 | 200 | 160 | 2,3 |
| U260 | 260 | 215 | 4,2 |
| U320 | 320 | 280 | 10 |
| U420 | 420 | 380 | 23 |
| U500 | 500 | 460 | 41 |
| U600 | 600 | 560 | 75 |
| Positions: horizontal, Inclined (all angles), vertical | |||
Click on "photos" to view multiple realizations
